Page 4
Pyramid DC Receiver Installation and Operating Instructions
PRODUCT SAFETY
Please follow these instructions as you install your pyramid module and keep them for future use. If you have any
problems contact your Baxall agent.
WARNING
Installation is only to be carried out by competent, qualified and experienced personnel. Wire in accordance with
your national wiring regulations. Failure to do so can result in injury or death by electric shock. Use a class 2 isolated
power supply for the 12V DC.
PRODUCT RELIABILITY
CAUTION
Your module is susceptible to damage from Electrostatic Discharge (ESD). Take normal ESD precautions when
handling your network card. ESD prevention kits are available from most electronics distributors.
Do not exceed the voltage and temperature limits given in the specification.
Switch off the power before fitting a network card.
ELECTROMAGNETIC COMPATIBILITY (EMC)
CAUTION
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
This product is intended for use in general purpose CCTV applications in a residential, commercial or light industrial
EMC environment, refer to Baxall Limited before using the product in an industrial EMC environment.
The product must be installed in accordance with good installation practice for EMC to enable the product to function as
intended and to prevent EMC problems.
Contact the Baxall Technical Support Department to obtain a specification defining the acceptable levels of product
degradation with regard to EMC immunity.
MANUFACTURERS DECLARATION OF CONFORMANCE
The manufacturer declares that the equipment supplied with this manual is compliant with the essential protection
requirements of the EMC directive 89/336 and the Low Voltage Directive LVD 73/23 EEC. Conforming to the requirements
of standards EN 55022 for emissions, IEC801 parts 2, 3 and 4 for immunity and EN 60950 for Electrical Equipment
safety.
UNPACKING
Keep your packaging for use if your DC receiver is stored for a time or needs to be returned for whatever reason. The
packaging should contain:-
PY-DCW, DC receiver
An A4 Module Description Sheet (for installation details)
These Instructions
Two identical bar-codes
Check the product code on the serial number label. If you have an incorrect item or it is damaged then inform the
suppliers and carriers immediately. If this is the case then do not attempt to use your DC receiver.
(31 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais